Barrier wall system
The term ‘barrier wall’ is used to refer to a system of external wall assembly that maintains weather-tightness by preventing the intrusion of air, water and vapour. Barrier walls rely on the integrity of the outermost surfaces and construction joints, and are considered a cost-effective alternative to cavity or solid wall assemblies.
The cladding material should be impervious to the elements. Common examples of barrier wall systems include:
- Single-skin metal wall panels.
- Solid-metal wall cladding.
- Precast concrete panels.
- Insulated metal-wall panels.
- Exterior insulation and finishing system (EIFS).
The exterior cladding in a barrier wall system serves as the main drainage plane – the element exposed to the weather. This differs from a cavity wall system where the main drainage plane and defensive line against bulk rainwater penetration is inside the cavity.
Careful installation of a barrier wall is crucial as the joints between facing units must be well sealed. The gaskets and caulking must be installed so that no water and/or air vapour can leak inside the cavity and damage the building envelope. There are often complex interface details that require specialist installation by professionals.
Although barrier wall systems often have a lower initial cost, this should be considered alongside the fact that they require a relatively high level of routine maintenance to remain effective over time as continued exposure to wind and rain can degrade the seals and lead to failure. Typically, they tend to be installed makes them more accessible should inspection or repairs be required.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Combating burnout.
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.